Kazan Model Dynamics
Menu

The Kazan Model Dynamics Blog

The Switch to 3D Resin....

2/2/2022

0 Comments

 
...is going well, but slower and with more complications than anticipated. Nevertheless, the wheel well set for the SWS F-4E (48th) is soon to be released. These pics show some prototype pieces, and as such, are a little less refined than what the end product will look like, but they did confirm fit and look. 
Picture
Picture
Picture
The set comprises 26 3D printed parts, 8 HybridCAST parts, 10 resin and one clear printed item. The HybridCAST items naturally contain stainless steel oleo and retraction pistons that look stunning. They are easy to use, because they need no masking for painting, and primers/paints/clear coats simply and effortlessly scrape off them with an appropriate knife. Unfortunately, it's tough to approach what these things look like in person on photographs. Below is the instruction sheet.
Picture
0 Comments



Leave a Reply.

    Archives

    January 2023
    November 2022
    October 2022
    June 2022
    February 2022
    August 2021
    July 2021
    May 2021
    February 2021
    January 2021
    December 2020
    November 2020
    October 2020
    June 2020
    December 2019
    October 2019
    July 2019
    May 2019
    April 2019
    March 2019
    January 2019
    December 2018

    Categories

    All
    F-14 Tomcat

    RSS Feed

  • Home
  • The Kazan Blog
  • e_Shop
  • F-14 Spine Article
  • F-14 Wing Box Article
  • Natural Metal Finishes (Naturally)
  • Home
  • The Kazan Blog
  • e_Shop
  • F-14 Spine Article
  • F-14 Wing Box Article
  • Natural Metal Finishes (Naturally)